NA-LOC4

$109.99

The Nemesis Audio NA-LOC4 is an active 4-input / 4-output line output converter designed to connect factory car stereos to aftermarket amplifiers. Featuring speaker-level inputs up to 40V, RCA outputs up to 9.5V, selectable 2-channel and 4-channel modes, adjustable 0–12 dB bass boost, front and rear gain controls, a selectable rear low-pass filter, and ground isolation, it offers flexible signal integration for upgraded car audio systems.

SKU: NA-LOC4 Category:
Description

Amplifier Owner's Manual

Key Features

  • 4-Input / 4-Output Design: Supports four speaker-level input channels and four output channels for multi-channel amplifier integration.
  • Active Line Output Conversion: Converts speaker-level audio signals into RCA outputs for compatible aftermarket amplifiers.
  • High-Level Input Support: Accepts input signals from 0.5V to 40V, with a 20kΩ load required for the maximum 40V input.
  • High-Voltage RCA Output: Provides output voltage up to 9.5V at a 13.8V supply.
  • Selectable Input Modes: Supports 2-channel and 4-channel input configurations.
  • Adjustable Bass Boost: Provides 0 to +12dB of bass enhancement at 45Hz on the rear channels.
  • Dual Gain Controls: Allows gain adjustment for two channel pairs to help match output levels to the connected amplifier.
  • Selectable Turn-On Modes: Supports REM and DC turn-on modes for flexible system integration.
  • Selectable Load Settings: Offers 20Ω, 60Ω and 20kΩ options to support different factory audio systems.
  • Selectable Rear-Channel Low-Pass Filter: Provides a 250Hz low-pass filter to help direct lower frequencies to a compatible subwoofer amplifier.
  • Remote Turn-On Input and Output: Supports remote activation and provides a turn-on signal for compatible aftermarket equipment.
  • Selectable Ground Isolation: GND, ISO and 200Ω settings help address unwanted ground-loop and alternator noise.
  • LED Clipping Indicators: Helps identify signal clipping during gain adjustment.
  • Optional Remote Level Control: Supports an optional wired remote level knob for rear-channel adjustment.
  • Low-Distortion Audio Performance: Manufacturer-rated THD+N is less than 0.01%.
  • Compact Aluminum Chassis: Measures 177 × 82 × 24.5mm for convenient installation in compatible vehicle audio systems.

Technical Specifications

Specification Details
Brand Nemesis Audio
Model NA-LOC4
Product Type 4-Input / 4-Output Line Output Converter
Speaker Input Channels 4 Channels
Output Channels 4 Channels
Operating Voltage 9–16V
Input Sensitivity 0.5–40V
Maximum Input Voltage 40V with a 20kΩ load
Maximum Output Voltage 9.5V at 13.8V supply
Input Impedance / Load Selection 20Ω / 60Ω / 20kΩ
Input Modes 2-Channel / 4-Channel
Signal-to-Noise Ratio Greater than 110dB at 6.4V output
Total Harmonic Distortion + Noise (THD+N) Less than 0.01%
Frequency Response 10Hz–20kHz
Maximum Current Draw 110mA (general NA-LOC specification)
Output Impedance Less than 120Ω
Gain Control Adjustable; manual specifies −28 to 1dB
Turn-On Modes REM / DC
DC Turn-On Trigger 3–7V (general NA-LOC specification)
Remote Turn-On Input Yes
Remote Turn-On Output Yes
Bass Boost 0 to +12dB at 45Hz, rear channels
Rear Low-Pass Filter 250Hz, selectable
Ground Isolation GND / ISO / 200Ω
Clipping Indicator LED, 2 channel-pair indicators
Remote Level Knob Optional; rear-channel level control
Terminal Type Quick Connect / 16 AWG
Chassis Material Aluminum
Dimensions (L × W × H) 177 × 82 × 24.5mm
Approximately 6.97 × 3.23 × 0.96 inches
Shipping & Delivery

For our valued customers, we offer straightforward shipping rates based on your order total and customer type.

Retail Customers

Orders under $100: Flat shipping fee of $10.

Orders over $100: Free shipping.

Wholesale Customers

Orders under $2,000: Flat shipping fee of $100.

Orders over $2,000: Free shipping.