NA-LOC2
$59.99
Upgrade your car audio system with the Nemesis Audio NA-LOC2 Line Output Converter, designed to connect factory-installed audio systems to aftermarket amplifiers. It converts speaker-level signals into RCA outputs, making it easier to integrate additional amplification while retaining your vehicle’s original stereo.
Amplifier Owner's Manual
Key Features
- 2-Input / 4-Output Design: Converts two speaker-level input channels into four RCA outputs for aftermarket amplifier integration.
- High-Level Input Support: Accepts input signals from 0.5V to 40V, with a 20kΩ load required for the maximum 40V input.
- Factory Stereo Integration: Designed to connect factory audio systems to compatible aftermarket amplifiers.
- High-Voltage RCA Output: Delivers output voltage up to 9.5V at a 13.8V supply.
- Adjustable Rear-Channel Bass Boost: Provides 0 to +12dB of bass enhancement at 45Hz.
- Dual Gain Controls: Independent gain adjustment for two channel pairs helps match output levels to the connected amplifier.
- Selectable Load Settings: Offers 20Ω, 60Ω and 20kΩ options to support different factory audio systems.
- Selectable Rear-Channel Low-Pass Filter: Switchable 250Hz low-pass filtering helps direct lower frequencies to a compatible subwoofer amplifier.
- Remote Turn-On Input and Output: Supports remote activation and provides a turn-on signal for compatible aftermarket equipment.
- Selectable Ground Isolation: GND, ISO and 200Ω settings help address unwanted ground-loop and alternator noise.
- LED Clipping Indicators: Helps identify signal clipping during gain adjustment.
- Optional Wired Remote Level Control: Allows convenient adjustment of rear-channel signal level from the driver’s seat.
- Low-Distortion Audio Performance: Manufacturer-rated THD+N is less than 0.01%.
- Compact Aluminum Chassis: Measures 122.5 × 82 × 24.5mm for convenient installation in compatible vehicle audio systems.
Technical Specifications
| Specification | Details |
|---|---|
| Brand | Nemesis Audio |
| Model | NA-LOC2 |
| Product Type | 2-Input / 4-Output Line Output Converter |
| Speaker Input Channels | 2 Channels |
| Output Channels | 4 Channels |
| Operating Voltage | 9–16V |
| Input Sensitivity | 0.5–40V |
| Maximum Input Voltage | 40V with a 20kΩ load |
| Maximum Output Voltage | 9.5V at 13.8V supply |
| Input Impedance / Load Selection | 20Ω / 60Ω / 20kΩ |
| Signal-to-Noise Ratio | Greater than 110dB at 6.4V output |
| Total Harmonic Distortion + Noise (THD+N) | Less than 0.01% |
| Frequency Response | 10Hz–20kHz |
| Maximum Current Draw | 110mA (general NA-LOC specification) |
| Output Impedance | Less than 120Ω |
| Gain Control | Adjustable; manual specifies −28 to 1dB |
| Remote Turn-On Input | Yes |
| Remote Turn-On Output | Yes |
| DC Turn-On Trigger | 3–7V (general NA-LOC specification) |
| Bass Boost | 0 to +12dB at 45Hz, rear channels |
| Low-Pass Filter | 250Hz, selectable for rear channels |
| Ground Isolation | GND / ISO / 200Ω |
| Clipping Indicator | LED, 2 channel-pair indicators |
| Remote Level Knob | Optional; rear-channel level control |
| Terminal Type | Quick Connect / 16 AWG |
| Chassis Material | Aluminum |
| Dimensions (L × W × H) | 122.5 × 82 × 24.5mm Approximately 4.82 × 3.23 × 0.96 inches |
For our valued customers, we offer straightforward shipping rates based on your order total and customer type.
Retail Customers
Orders under $100: Flat shipping fee of $10.
Orders over $100: Free shipping.
Wholesale Customers
Orders under $2,000: Flat shipping fee of $100.
Orders over $2,000: Free shipping.
Related products
LOC-2BR
In stock
Buy nowEnhance your car audio system with the Nemesis Audio LOC-2BR, an active 2-channel line output converter designed to integrate factory and aftermarket audio systems. Featuring digital bass restoration, adjustable bass controls, and flexible signal conversion, it helps recover low-frequency bass that may be reduced by factory-installed stereos.
LOC-BE2
In stock
Buy nowUpgrade your car audio system with the Nemesis Audio LOC-BE2, an active 2-channel line output converter and line driver featuring digital bass enhancement. Designed to work with both factory-installed and aftermarket audio systems, it converts speaker-level or low-level RCA signals into RCA outputs for connecting an aftermarket amplifier.
NA-LOC4
In stock
Buy nowThe Nemesis Audio NA-LOC4 is an active 4-input / 4-output line output converter designed to connect factory car stereos to aftermarket amplifiers. Featuring speaker-level inputs up to 40V, RCA outputs up to 9.5V, selectable 2-channel and 4-channel modes, adjustable 0–12 dB bass boost, front and rear gain controls, a selectable rear low-pass filter, and ground isolation, it offers flexible signal integration for upgraded car audio systems.
NA-LOC6
In stock
Buy nowThe Nemesis Audio NA-LOC6 is an active 6-input / 6-output line output converter designed to connect factory car stereos to aftermarket amplifiers. Featuring speaker-level inputs up to 40V, RCA outputs up to 9.5V, selectable 4-channel and 6-channel modes, adjustable 0–12 dB bass boost, independent front, rear, and subwoofer gain controls, a selectable subwoofer low-pass filter, and ground isolation, it provides flexible signal integration for advanced car audio upgrades.
