PRO-LOC6
$189.99
A six-channel line output converter with up to 9.5Vrms output, selectable input impedance, bass enhancement, and remote level control.
The Nemesis Audio PRO-LOC6 integrates factory amplified systems with aftermarket amplifiers while preserving signal quality and offering extensive tuning control.
- Six-channel line output converter
- Maximum output up to 9.5Vrms
- Input gain adjustment of plus or minus 10 dB
- Output gain adjustment of plus or minus 15 dB
- 20Hz-20kHz frequency response
- Maximum input handling of 40V / 400W
- Remote attenuation range from 0 to -20 dB
- Selectable input impedance: 20, 60, or 20k ohms
- 150-ohm output impedance
- THD below 0.01%
- Signal-to-noise ratio over 105 dB
- Recommended 2A fuse
| Product Type | 6-Channel Line Output Converter |
|---|---|
| Maximum Output | 9.5 Vrms |
| Frequency Response | 20Hz-20kHz |
| Maximum Input | 40V / 400W |
| Output Impedance | 150 Ohms |
| THD | <0.01% |
| Signal-to-Noise Ratio | >105 dB |
| Recommended Fuse | 2A |
For our valued customers, we offer straightforward shipping rates based on your order total and customer type.
Retail Customers
Orders under $100: Flat shipping fee of $10.
Orders over $100: Free shipping.
Wholesale Customers
Orders under $2,000: Flat shipping fee of $100.
Orders over $2,000: Free shipping.
Related products
LOC-BE2
In stock
Upgrade your car audio system with the Nemesis Audio LOC-BE2, an active 2-channel line output converter and line driver featuring digital bass enhancement. Designed to work with both factory-installed and aftermarket audio systems, it converts speaker-level or low-level RCA signals into RCA outputs for connecting an aftermarket amplifier.
NA-LOC4
In stock
The Nemesis Audio NA-LOC4 is an active 4-input / 4-output line output converter designed to connect factory car stereos to aftermarket amplifiers. Featuring speaker-level inputs up to 40V, RCA outputs up to 9.5V, selectable 2-channel and 4-channel modes, adjustable 0–12 dB bass boost, front and rear gain controls, a selectable rear low-pass filter, and ground isolation, it offers flexible signal integration for upgraded car audio systems.
NA-LOC6
In stock
The Nemesis Audio NA-LOC6 is an active 6-input / 6-output line output converter designed to connect factory car stereos to aftermarket amplifiers. Featuring speaker-level inputs up to 40V, RCA outputs up to 9.5V, selectable 4-channel and 6-channel modes, adjustable 0–12 dB bass boost, independent front, rear, and subwoofer gain controls, a selectable subwoofer low-pass filter, and ground isolation, it provides flexible signal integration for advanced car audio upgrades.
NEO-MR69CF
In stock
Enhance your car audio system with the Nemesis Audio NEO-MR69CF 6x9-Inch Water-Resistant Midrange Speaker, designed for powerful sound output and clear audio reproduction. With a maximum power rating of 700W and 350W RMS power handling, this speaker is built for high-output car audio setups and enthusiasts who want an engaging listening experience.
NEO-MB69CF
In stock
Upgrade your car audio system with the Nemesis Audio NEO-MB69CF 6×9-Inch Water-Resistant Midbass Speaker, designed to deliver powerful sound output and detailed midbass performance. With a high 700W maximum power rating and 350W RMS power handling, this speaker is built for enthusiasts seeking an impactful, high-output audio experience.
NEO-MR8CF
In stock
Upgrade your car audio system with the Nemesis Audio NEO-MR8CF 8-Inch Water-Resistant Midrange Speaker, designed for powerful sound output, clear vocals, and detailed midrange performance. With 700W maximum power handling, 350W RMS power, and 97.5 dB sensitivity, this speaker is built for audio enthusiasts who want strong, efficient sound reproduction.
NEO-CX69CF
In stock
Upgrade your car audio system with the Nemesis Audio NEO-CX69CF 6x9-Inch Water-Resistant Speaker, designed to deliver powerful output, efficient sound reproduction, and dependable performance. With a maximum power rating of 700W and 350W RMS power handling, this speaker is suitable for high-output car audio setups.
