NA-X2500.5D
$499.99
The Nemesis Audio NA-X2500.5D is a high-performance 5-channel car audio amplifier designed to power your vehicle’s front speakers, rear speakers, and subwoofer from a single unit. With an advertised total output of 2,500W RMS, it offers a versatile solution for building a powerful, well-balanced car audio system.
Key Specifications
| Specification | Details |
|---|---|
| Brand | Nemesis Audio |
| Model | NA-X2500.5D |
| Amplifier Type | Full Range Class D |
| Channel Configuration | 5-Channel |
| Advertised Total Output | 2,500W RMS |
| Operating Test Voltage | 14.4V |
| Total Harmonic Distortion | Less than 0.2% |
| Signal-to-Noise Ratio | Greater than 90dB |
| Input Sensitivity | 0.37V–7.8V |
| Frequency Response | 10Hz–20kHz + 10Hz–220Hz |
| Subwoofer LPF Crossover Range | 60Hz–220Hz |
| Digital Voltage Meter | Included |
| Chassis Finish | Black |
| Dimensions | 334 × 200 × 58mm |
| Dimensions (Inches) | 13.15 × 7.87 × 2.28 inches |
Power Output
The packaging lists the following RMS power ratings at 14.4V and less than 1% THD.
| Configuration | RMS Power Output |
|---|---|
| Subwoofer Channel at 1Ω | 1,500W × 1 |
| Four Channels at 2Ω + Subwoofer at 2Ω | 300W × 4 + 1,100W × 1 |
| Four Channels at 4Ω + Subwoofer at 4Ω | 200W × 4 + 650W × 1 |
| Bridged Configuration | Additional bridged rating is printed on the packaging; exact figure requires verification |
Note: The power ratings above are transcribed from the supplied packaging. Confirm the exact bridged configuration and supported impedance combinations with the manufacturer before publication.
Crossover & Audio Controls
| Feature | Specification |
|---|---|
| Low-Pass Filter (LPF) | 60Hz–220Hz |
| Input Sensitivity | 0.37V–7.8V |
| Front & Rear Channel Tuning | Adjustable crossover and sensitivity controls |
| Subwoofer Channel | Dedicated subwoofer output |
| Subsonic Filter | Adjustable |
| Bass Control | Dedicated subwoofer tuning controls |
| Remote Control | Remote bass control shown with the product |
| Voltage Monitoring | Built-in digital voltage display |
Key Features
-
5-Channel Design: Power front and rear speakers alongside a subwoofer using one amplifier.
-
High RMS Power Output: Advertised 2,500W RMS total output for demanding car audio systems.
-
Class D Amplification: Designed for efficient power delivery in vehicle audio installations.
-
Adjustable Audio Tuning: Customize crossover settings and input sensitivity to match compatible speakers and subwoofers.
-
Dedicated Subwoofer Controls: Fine-tune low-frequency output for a more personalized bass response.
-
Digital Voltage Display: Monitor system voltage conveniently through the integrated display.
-
Compact Construction: The low-profile design helps simplify installation in suitable vehicle spaces.
-
Ribbed Heatsink Chassis: Designed to help dissipate heat during operation.
Ideal Applications
-
Complete car audio system upgrades
-
Front and rear speaker amplification
-
Subwoofer and bass system installations
-
Custom multi-channel car audio builds
-
High-output vehicle sound systems
Package Contents
-
1 × Nemesis Audio NA-X2500.5D amplifier
-
1 × Remote bass control, as shown on the packaging
-
Additional cables and installation accessories: subject to package confirmation
| Amplifier Class | Class D |
|---|---|
| Channels | 5 Channel |
| Sub Channel at 1 Ohm | 1500W x 1 |
| Output at 2 Ohms | 300W x 4 + 1100W x 1 |
| Output at 4 Ohms | 200W x 4 + 650W x 1 |
| Bridged Output | 640W x 2 at 4 Ohms |
| Input Sensitivity | 0.37-7.8V |
| Dimensions | 334 x 200 x 58 mm |
For our valued customers, we offer straightforward shipping rates based on your order total and customer type.
Retail Customers
Orders under $100: Flat shipping fee of $10.
Orders over $100: Free shipping.
Wholesale Customers
Orders under $2,000: Flat shipping fee of $100.
Orders over $2,000: Free shipping.
Related products
NA-1KD
In stock
Buy nowThe Nemesis Audio NA-1KD is a high-performance monoblock Class D amplifier designed to deliver powerful, efficient bass output. With support for 1Ω, 2Ω, and 4Ω loads, adjustable low-pass filtering, subsonic filtering, and bass boost control, it provides flexible tuning for a wide range of car audio subwoofer systems.
FIERCE-3.5KD
In stock
Buy nowThe Nemesis Audio FIERCE-3.5KD is a high-output Class D monoblock amplifier designed for powerful subwoofer applications. It delivers up to 3500W MAX / 1750W RMS at 1 Ohm, with strong output at 2 Ohm and 4 Ohm loads. The amplifier also features adjustable crossover control, bass boost, a wide gain range, and an included bass knob for precise low-frequency tuning.
NA-2.5KD
In stock
Buy nowThe Nemesis Audio NA-2.5KD is a high-output Class D monoblock amplifier delivering up to 2,500W MAX / 1,176W RMS at 1 Ohm. It is designed for powerful low-frequency applications, with adjustable LPF and subsonic filtering, bass boost control, and a compact chassis suitable for high-performance car audio installations.
NA-700.4KOR
In stock
Buy nowThe Nemesis Audio NA-700.4KOR is a 4-channel amplifier from Nemesis Audio’s Korean Series, designed for high-quality multi-channel car audio applications. The supplied images confirm the NA-700.4KOR model, Korean Series branding, and Made in Korea designation. Detailed electrical specifications are verified from the manufacturer’s current product listing.
FIERCE-5KD
In stock
Buy nowThe Nemesis Audio FIERCE-3.5KD is a high-output Class D monoblock amplifier designed for powerful subwoofer and low-frequency applications. It delivers up to 3,500W MAX / 1,750W RMS at 1 Ohm, with strong output at 2 Ohm and 4 Ohm loads. Its adjustable crossover, bass boost, and included bass knob provide flexible control for tuning your system.
FIERCE-4500X5D
In stock
Buy nowThe Nemesis Audio FIERCE-4500X5D is a powerful 5-channel full-range digital car audio amplifier designed to drive front and rear speakers alongside a subwoofer from a single unit. With an advertised maximum output of 4,500W RMS, it offers flexible power configurations for high-performance car audio installations.
FIERCE-7000X4D
In stock
Buy nowThe Nemesis Audio FIERCE-7000X4D is a 4-channel full-range digital car audio amplifier designed for powerful sound system installations. It features a black finned metal housing, adjustable crossover controls, and high-power output options for compatible speakers and bridged configurations. Its wide frequency response and flexible input sensitivity make it suitable for a range of car audio setups.